0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Components

Put the finishing touch on your creation. Here you can find anything you might need to connect, suspend or reinforce your lamp. Power plugs and strips, cord switches and dimmers, hooks, nails, and screws – you name it! All of the components are available in different varieties so there is always something that fits your style.

   

Items 1 to 10 of 215 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Have you ever seen a good-looking cable holder? Well, here is one dazzling brass cable holder! Suitable for fabric cables with a max. diameter of 6mm.

    €3.65
  2. A cable strain relief protects the textile cable and will prevent the lamp holder from falling down. The device locks the cable with a simple screw. 

    €0.65
  3. Classic black plug. Very easy to install.

    NOTE: This plug is not suitable for use in Belgium.

    €1.15
  4. A true cable switch design classic. Some small products make big differences and this timeless black light switch from Italy is a perfect example. It was originally released by VLM in 1968. Now available again at Light Essentials!

    €4.99
  5. A cable strain relief protects the wire and will prevent the lampholder from falling down. The device locks the wire with a simple screw. It is safer and nicer to use one.
    €2.05
  6. Cord grip brass - for thicker cables Light Essentials Cord grip brass - for thicker cables Light Essentials
    New

    A cord grip for your thicker fabric cables. This one is brass colored and made for cables that are around 7 mm thick. Our regular fabric cables are about 5 mm thick and can easily go with our common cord grips. 

    A cord grip is a little 'cap' which you screw on top of your lamp holder. It is used to finish and strengthen your fabric cable.

    €3.95
  7. Classic black plug

    NOTE: This plug is not suitable for use in Belgium.

    €1.79
  8. Screw this transparent strain relief onto your lamp holder to reinforce and nicely finish your cable. This strain relief secures your lamp holder.

    €0.69
  9. Sturdy floor dimmer, especially made for LED lamps. This dimmer has a slider switch and a traditional on/off switch. It can easily be found in the dark thanks to the small indication light inside. 

    LED lamps from 4W can be dimmed with this floor dimmer. Of course it is also suitable for traditional incandescent and halogen bulbs.

    Caution: Unfortunately dimming LED lamps is, due to the complex technology, still a matter of trial and error. In some cases, the wattage of the bulb does not match with the cut-off value of the dimmer. For this reason, we cannot provide warranty in these cases.

    €29.50
    • Black switch
    • CE certified
    €2.25

   

Items 1 to 10 of 215 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5